Cat No. MOP-32DI
Mo'protection is the most advanced PLC I/O wiring system of its type with features that will return real benefits
Mo'protection is a PLC I/O wiring system that provides fused protection to reduce exposure from component failure that could cripple an automated plant. In addition to the increased protection this PLC I/O wiring system minimises PLC panel assembly time. It has factory assembled wiring looms and DIN rail mounted chassis.
The Module
You can only connect wiring to the module on the terminal block. The example above shows how to wire the module
- All terminals with the same name are connected together on the module
- The module requires a single voltage source connected to the +24 and 0V terminals
This product is designed to meet Council Directive 73/23/EEC low voltage, by applying the safety requirements EN 61131-2.
This equipment is classified as open equipment and must be installed (mounted) in an enclosure during operation as a means of providing safety protection
Wiring the Terminal Block
- Wire the TB with a 3.2mm maximum flat-bladed screwdriver
- Strip 9.5mm maximum length of wire
- Insert the screwdriver into the upper hole of the terminal
- Insert the wire into the open terminal and remove the screwdriver
Note: Its is advisable to use wire ferrules
